Where to Next?
You can also install the Air Vent on the left front door of your canopy and leave it half way open while driving on dirt roads. This will let air into the canopy which will build up pressure inside the canopy, thus minimize dust that comes into the canopy via the tail gate.
The air vent is easy to install, just drill a 76mm hole in the side of the canopy, apply some Sikaflex to the air vent and then push it into the hole.
The Air Vent is an Italian product, manufactured from high quality plastic.
The inner part of the air vent can rotate 360 degrees
ID = 76mm
OD = 101mm
Total Thickness = 32mm
Thickness of inner part only = 26mm
Note: It is not waterproof, if you spray water directly onto it when washing your vehicle some water will enter.
During rain you obviously have to close it.
No customer reviews for the moment.
Reference: AIRVENT-HATCH
Brand: Badger
Air Vent-Hatch aluminium for Canopies. Used to force positive pressure into the canopy. 232mm x 144mm x 20mm (Outside Measurements) Total thickness is 43mm.
Reference: HANDLE-FLUSHPULL
Brand: Badger
Flush pull handle for drawers Size: 130mm x 35mm
Reference: AIRVENT-HATCH
Brand: Badger
Air Vent-Hatch aluminium for Canopies. Used to force positive pressure into the canopy. 232mm x 144mm x 20mm (Outside Measurements) Total thickness is 43mm.
Reference: HANDLE220
Brand: Badger
Plastic Grab Handle to be used when building your own drawer system for your 4x4. These plastic handles are also very handy when you build your own fold up solar panels.
Reference: AIRVENT-TOPALU
Brand: Badger
Aluminium Muller vent for canopies. Size is 350 x 275 x 70mm
Reference: HANDLESPRINGLOADED
Brand: Badger
Mild steel - Chrome Plated spring loaded flush mount drawer handle
Reference: AIRVENT-TOPPL
Brand: Badger
Plastic tear drop Muller vent for canopies. Size is 285 x 185 x 58mm
