Reference: RAP-B-202U-GOP2
Brand: RAM
RAM Ball Adaptor for GoPro Mounting Bases
RAM ball adapter Gopro mount bases
The RAM-HOL-UN9U consists of a composite spring loaded cradle, expandable grip arms and additional bottom support keeper. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The RAM-HOL-UN9U expands and contracts for perfect fit of most 10″ tablets with or without sleeves, as well as some smaller tablets. Please verify dimensions of your tablet below for compatibility with the X-Grip®.
The X-Grip® cradle is compatible with tablets devices that will fit the dimensions listed below. It is important to verify the dimensions of your tablet with a case/sleeve/skin when determining the overall size.
Cradle Dimensions:
Minimum Width = 6.25″ (15.87cm)
Maximum Width = 8.1″ (2-.57cm)
Depth = 0.875″ (2.22cm)
Maximum Length (using additional supports) = 10.25″ (26.03cm) however it is not necessarily a requirement to use both supports.
Features:
1. Spring loaded cradle expands and contracts for perfect fit of your tablet
2. Rubber coated tips will hold your tablet firm and stable
3. Versatility of cradle allows for attachment to many 1″ socket mounts
4. Socket technology allows for multiple adjustment angles and articulation of your tablet
5. Easy access grip knobs, located on the back of the cradle for quick release of your tablet
6. Multiple mounting access points on the back of the cradle
7. Additional support keeper at the bottom of the cradle
8. Full access to all ports
9. Lifetime warranty
Material:
Marine Grade Stainless Steel Components & High Strength Composite
No customer reviews for the moment.
Reference: RAP-B-202U-GOP2
Brand: RAM
RAM ball adapter Gopro mount bases
Reference: RAM-HOL-AP20U
Brand: RAM
The RAM® EZ-Roll’r cradle for the Apple iPad mini 4 & 5 is the most cost effective and simple way to secure the iPad mini 4 in a variety of applications
Reference: RAM-B-201U-A
Brand: RAM
The RAM-B-201U-A, Short length double socket arm, has a socket at both ends that accommodates B Size 1″ balls.
Reference: RAM-HOL-UN7BU
Brand: RAM
The popular spring-loaded RAM® X-Grip® phone holder features an ‘X’ design that expands and contracts to provide a perfect fit for your device – even if it’s in a case.
Reference: RAM-B-224-1U
Brand: RAM
The RAM-B-224-1U consists of a83.82mm diameter suction cup twist lock base that is connected to the (RAM-B-238U), diamond base with B size 1″ rubber ball.
Reference: RAM-HOL-UN8BU
Brand: RAM
The RAM-HOL-UN8BU consists of a spring loaded cradle and 1″ rubber ball connected to the back of the base. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The RAM-HOL-UN8B expands and contracts for perfect fit of most 7″-8″ tablets. T
Reference: RAM-B-149Z-UN7U
Brand: RAM
RAM® X-Grip® Phone Mount with Handlebar U-Bolt Base
Reference: RAM-B-189BU
Brand: RAM
The RAM-B-189BU consists of a double 83.82mm twist lock suction cup base.
Reference: RAM-HOL-UN10BU
Brand: RAM
RAM® X-Grip® Large Phone Holder with Ball
Reference: RAM-HOL-PD3
Brand: RAM
RAM® Quick-Grip™ Universal Phone Holder
Reference: RAM-B-202AU
Brand: RAM
RAM® Ball Adapter with Round Plate and 1/4"-20 Threaded Stud
Reference: RAP-UN-CAP-4U
Brand: RAM
Consists of (4 qty) post caps that are an accessory for all RAM X-grip cradles and mounts.
Reference: RAM-HOL-UN10-400U
Brand: RAM
The RAM-HOL-UN10-400U consists of the small Tough-Claw base and universal X-Grip cradle for large phones and phablets. The X-Grip cradle has a clean and clever four leg design that sports great holding power without hiding your smart-phone behind foam pads and plastic.
Reference: RAM-B-231ZU
Brand: RAM
RAM® Handlebar U-Bolt Base for Rails 0.5″ to 1.25″ in Diameter
Reference: RAM-B-347U
Brand: RAM
The RAM-B-347U base consists of a 1″ diameter rubber ball connected at right angles to a 50.8mm x 43.18mm square base plate.
Reference: RAM-B-189B-202U
Brand: RAM
The RAM-B-189B-202U consists of double 3.3" twist lock suction cup bases that is connected to a powdercoated metal plate and a B size 1" ball is included
Reference: RAP-B-400U
Brand: RAM
The RAM Tough-Claw is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw can be clamped on rails from 16mm to 38mm outer diameter.