Security policy (edit with Customer reassurance module)
Delivery policy (edit with Customer reassurance module)
Return policy (edit with Customer reassurance module)
Ring terminal M10-Blue
Insulated ring terminal to fit M10 bolt and 2.5mm² to 4mm² wire ( 12-10awg )
Insulated crimp ring terminal, also known as a ring connector or cable lug. Ring crimp terminals are used for connecting an electrical cable or wire to a stud or a post on an electrical component such as a battery terminal.
Pre-insulated crimp terminals are used to terminate stranded wire. They are applied onto a wire and crimped using our recommended crimp tools to produce a neat terminated end.
No customer reviews for the moment.
Reference: CRIMPINGTOOL-INSULATE
Brand: Iwiss
Iwiss crimping tool for insulated terminals
Reference: LUG-35H6
Brand: Badger
Takes max of 35mm² Cable and fit 6mm bolt. Standard tinted lug
Reference: FERRULE4
Brand: Badger
Non insulated crimping Ferrule for 4mm Cable
Reference: TERMINALF1mm-NARROW
Brand: Badger
NOTE: This female terminal is narrower than the standard size. It is used for the round rocker switches, Micro Lever switch and 7 and 8 amp alarm batteries with narrow terminals 0.5mm² to 1.5mm² wire
Reference: TERMINALM2mm
Brand: Badger
Insulated Male Spade Terminal - Blue each 2.5mm² to 4mm² wire
Reference: TERMPIGGYBLUE
Brand: Badger
Terminal BLUE PIGGY BACK PACK OF 10
Reference: CONNECTORBLOCK10mm
Brand: Badger
Connector Block to connect wires max 10sqr mm. In electrician lingo it is also called a "chocolate block"
Reference: LUG-6H8
Brand: Badger
Takes max of 6mm² Cable and fit M8 bolt. Standard tinted lug
Reference: TERMINALRING1-4
Brand: Badger
Ring terminal to fit M4 bolt. Red = 0.5mm² to 1.5mm² wire
Reference: TERMBULLETBM
Brand: Badger
Male Bullet Terminal to fit 2.5mm² to 4mm² wire
Reference: TERMPIN-10-12
Brand: Badger
Pin terminal to allow for quick wire connects and disconnects Brazed seam on crimp barrel Tin plated
Reference: BUTTSPLICEY
Brand: Badger
Insulated butt splice or crimping ferrule for 4mm² to 6mm² wire
Reference: TERMINALF2mm
Brand: Badger
Insulated Female Spade Terminal - Blue each 2.5mm² to 4mm² wire
Reference: LUG-25H8
Brand: Badger
Takes max of 25mm² cable and fits a M8 bolt Standard tinted lug
Reference: TERMPIN-5-12
Brand: Badger
Pin terminal to allow for quick wire connects and disconnects Brazed seam on crimp barrel Tin plated
Reference: LUG-16H10
Brand: Badger
Takes max of 16mm² Cable and fit 10mm bolt. Standard tinted lug
Reference: LUG-25H10
Brand: Badger
Takes max of 25mm² Cable and fit 10mm bolt. Standard tinted lug
