Where to Next?
Security policy (edit with Customer reassurance module)
Delivery policy (edit with Customer reassurance module)
Return policy (edit with Customer reassurance module)
Fork Terminal M6 - YELLOW
Insulated Fork Terminal to fit M6 bolt and 4mm² to 6mm² wire ( 12-10awg )
These insulated crimp-spade terminals are your go-to solution for effortless wire termination without the hassle of soldering. Designed to connect wires to studs, bus bars, and more
Pre-insulated crimp terminals are used to terminate stranded wire. They are applied onto a wire and crimped using our recommended crimp tools to produce a neat terminated end.
No customer reviews for the moment.
Reference: LUG-25H8
Brand: Badger
Takes max of 25mm² cable and fits a M8 bolt Standard tinted lug
Reference: TERMPIN-35-20
Brand: Badger
Pin terminal to allow for quick wire connects and disconnects Brazed seam on crimp barrel Tin plated
Reference: TERMINALF1mm
This terminal will fit our Red Male terminals This is the standard sized female spade terminal. 0.5mm² to 1.5mm² wire 6.5mm wide.
Reference: TERMINALF5mmIS
Brand: Badger
Fully Insulated Female Spade Terminal Yellow Insulation: Conductor size 4.0-6.0mm² / 12-10awg
Reference: TERMPIN-25-15
Brand: Badger
Pin terminal to allow for quick wire connects and disconnects Brazed seam on crimp barrel Tin plated
Reference: TERMINALRING2-6
Brand: Badger
Ring Terminal to fit M6 bolt. Blue = 2.5mm² to 4mm² wire
Reference: LUG-25H6
Brand: Badger
Takes max of 25mm² Cable and fit 6mm bolt. Standard tinted lug
Reference: CONNECTORBLOCK10mm
Brand: Badger
Connector Block to connect wires max 10sqr mm. In electrician lingo it is also called a "chocolate block"
Reference: TERMPIGGYBLUE
Brand: Badger
Terminal BLUE PIGGY BACK PACK OF 10
Reference: TERMINALRING2-8
Brand: Badger
Ring Terminal to fit M8 Bolt. Blue = 2.5mm² to 4mm² wire
Reference: LUG-25H10
Brand: Badger
Takes max of 25mm² Cable and fit 10mm bolt. Standard tinted lug
Reference: TERMINALF1mm-NARROW
Brand: Badger
NOTE: This female terminal is narrower than the standard size. It is used for the round rocker switches, Micro Lever switch and 7 and 8 amp alarm batteries with narrow terminals 0.5mm² to 1.5mm² wire
Reference: FERRULE4
Brand: Badger
Non insulated crimping Ferrule for 4mm Cable
Reference: LUG-6H8
Brand: Badger
Takes max of 6mm² Cable and fit M8 bolt. Standard tinted lug
Reference: BUTTSPLICEB
Brand: Badger
Insulated butt splice or Ferrule to fit 2.5mm² to 4mm² wire
Reference: FERRULE10
Brand: Badger
Non Insulated crimping Ferrule for 10mm² Cable
