Security policy (edit with Customer reassurance module)
Delivery policy (edit with Customer reassurance module)
Return policy (edit with Customer reassurance module)
Wheel Adaptor change PCD from 5 Stud 160 (Mahindra) to 6 Stud 139.7 (ex Hilux)
You attach the 160 PCD part of the adaptor to the vehicle, then you attach the 139.7 part to the 160 part.
Allows you to put normal 6 stud rims on Mahindra.
*Note - Price is per unit
Make sure the surface on the vehicle hub is clean and free from any debris before fitment.
The same applies to the back of the wheel spacer which should be clean.
Tighten all nuts by hand first, then torque in cross over sequence to 30 Nm. Then Torque to 120Nm.
When you have them fitted at a tyre fitment centre, keep an eye on the procedures because they normally tighten it with impact wrench. DO NOT allow them to use an impact wrench and make sure they tighten them in cross over sequence.
Check the wheel spacer nuts after the first 500 km to make sure they are tight. Thereafter check every 5000km.
No customer reviews for the moment.
Reference: WSPACERMAHINDRA-30mm
Brand: Badger
30mm Wheel spacer to fit Mahindra Thar and Bolero PCD = 5/160 Price is per one spacer
Reference: WSPACER-TOY-SPI
Brand: Badger
It will fit front and rear on auto hub models like Revo, Vigo, Prado and FJ Cruiser NOTE: Because of the spigot ring it will NOT fit over a manual hub like on the SFA and IFS Hilux. On SFA and IFS Hiluxes and the older Cruisers it will only fit at the rear and you will still have to fit the normal old universal 6 stud spacer at the front to go over...
Reference: WSPACER6NAVARA
Brand: Badger
6 Stud Wheel Spacer Nissan Navara PCD 114.3. 30mm thick Price per one spacer.
Reference: WSPACER-NIS-GWM-SPI
Brand: Badger
Fits Nissan Hardbody and GWM Steed PCD = 139.7 Inner Bore = 100.1mm Thickness = 30mm Stud = M12x1.25 Note, if you vehicle has a manual hub in front the spigot ring will not go over it. Price per spacer
Reference: WSPACERGELANDEWAGEN
Brand: Badger
Gelandewagen Wheel Spacers 5 stud 130 PCD With Spigot ring Price is per one spacer
Reference: STUD14X1-5
These extra studs will fit the 5 stud Land Cruiser wheel spacer - M14 x 1.5 Stud - M14x1.5mm - high tensile 12.9 grade Nuts - 40CrMo high tensile steel
Reference: SHANKNUT-12x1.5
Brand: Badger
Wheel nut with Shank for Toyota Land Hilux with Aluminium rims. M12x1.5 These wheel nuts are used when you fit the standard OEM aluminium rims on a Hilux. Length 47mm -
Reference: SHANKNUT-14x1.5
Brand: Badger
Wheel nut with Shank for Toyota Land Cruiser with Aluminium rims. M14x1.5 These wheel nuts are used when you fit the standard OEM aluminium rims on a Land Cruiser. Length 47mm -
Reference: WSPACER-ISUZU-SPI
Brand: Badger
Fits all Isuzu bakkies from 1972 to current PCD = 139.7 Inner Bore = 100.1mm Thickness = 30mm - Stud = M12x1.5 Note, if you vehicle has a manual hub in front the spigot ring will not go over it. Price per spacer
Reference: WSPACER5STUD
Brand: Badger
5 Stud Wheel Spacer for Land Cruiser Pick Up PCD 150mm, 45mm thick. Price is per one spacer
Reference: STUD12X1.5
This extra stud fits the 6 stud wheel spacer used for Hilux, Ford, Mazda, Mitsibushi and others. Stud - M12x1.5mm - high tensile 12.9 grade Nuts - 40CrMo high tensile steel
Reference: WSPACER6NISSAN
Brand: Badger
6 Stud Wheel Spacer - Nissan Fits Hardbody and Patrol(Does not fit Y62 Models) PCD 139.7, 30mm thick. Price per unit.
Reference: WSPACER-FORD-SPI
Brand: Badger
Fits all Ford Ranger and Courier models PCD = 139.7 Inner Bore = 93.1mm Thickness = 30mm Stud = M12x1.5 Note, if you vehicle has a manual hub in front the spigot ring will not go over it. Price per spacer
Reference: WSPACERLANDY
Brand: Badger
5 Stud Wheel Spacer for Land Rover Defender. 38mm thick, 165.1 mm PCD. Price per one spacer.
Reference: WSPACERJIMNY
Brand: Badger
Wheel Spacer for Jimny, SJ40, Lada Niva, Ford F100. 5 Stud Spacer with 139.7 mm PCD. 30mm thick. Price is per one spacer
Reference: STUD12X1-5-REVO
Brand: Badger
The standard studs on the Toyota REVO is too short to fit wheel spacers. If you want to fit wheel spacers to a Revo you will have to replace the original studs on the vehicle with longer studs. This is what these are for. Yes, you must replace all 24x of them.
