Reference: EXSHACKNAVARA
Brand: Mikem
Nissan Navara Extended Shackles - set of 2
Includes greasable pins and poly bushes Rear Only
Security policy (edit with Customer reassurance module)
Delivery policy (edit with Customer reassurance module)
Return policy (edit with Customer reassurance module)
Have a look at http://www.wheel-size.com/size/ to see what size spacer your vehicle use.
NOTE: Price is per spacer!
You can use these wheel spacers to push out the wheel a bit. Some people do it for the looks and others use wheel spacers because they fit new rims and the new rims catches the calipers.
The wheels spacer bolts onto the vehicle on the existing studs with the nuts supplied.
Your wheel then bolts onto the wheel spacer using the studs on the wheel spacer and your original nuts.
Notes: Please read full fitment instructions here:
http://www.4x4direct.co.za/blog/fitment-instructions-for-wheel-spacers/
Make sure the surface on the vehicle hub is clean and free from any debris before fitment.
The same applies to the back of the wheel spacer which should be clean.
Tighten all nuts by hand first, then torque in cross over sequence to 30 Nm. Then Torque to 100Nm.
When you have them fitted at a tyre fitment centre, keep an eye on the procedures because they normally tighten it with impact wrench. DO NOT allow them to use an impact wrench and make sure they tighten them in cross over sequence.
Check the wheel spacer nuts after the first 500 km to make sure they are tight. Thereafter check every 5000km.
The picture below shows how to fit the wheel spacer to your vehicle
Made in PRC to our specifications
By Piet Petoors (Google +)
No customer reviews for the moment.
Reference: EXSHACKNAVARA
Brand: Mikem
Includes greasable pins and poly bushes Rear Only
Reference: STRUTNAVARA20
Brand: Gobi-X
Gives about 38mm lift Precision Engineered for a perfect fit
Reference: STRUTNAVARA30
Brand: Gobi-X
Gives about 48mm lift Precision Engineered for a perfect fit
Reference: WSPACER-ISUZU-SPI
Brand: Badger
Fits all Isuzu bakkies from 1972 to current PCD = 139.7 Inner Bore = 100.1mm Thickness = 30mm - Stud = M12x1.5 Note, if you vehicle has a manual hub in front the spigot ring will not go over it. Price per spacer
Reference: WSPACER-FORD-SPI
Brand: Badger
Fits all Ford Ranger and Courier models PCD = 139.7 Inner Bore = 93.1mm Thickness = 30mm Stud = M12x1.5 Note, if you vehicle has a manual hub in front the spigot ring will not go over it. Price per spacer
Reference: STUD12X1.25
This extra stud fits the 6 Stud Nissan spacers Stud - M12x1.25mm - high tensile 12.9 grade Nuts - 40CrMo high tensile steel
Reference: WSPACERJEEP127
Brand: Badger
Jeep Wrangle JK 2007-2018 5 Stud Wheel spacer with 127mm PCD 30mm thick, with spigot ring Price per one.
Reference: WSPACERLANDY
Brand: Badger
5 Stud Wheel Spacer for Land Rover Defender. 38mm thick, 165.1 mm PCD. Price per one spacer.
Reference: STUD1-2-20UNF
Brand: Badger
This extra stud will fit the Jeep wheel spacers. Stud - 1/2" x 20UNF - high tensile 12.9 grade Nuts - 40CrMo high tensile steel
Reference: WSPACERJEEP114
Brand: Badger
Wheel Spacer for Jeep 5 stud PCD 114.3 . 30mm thick Price is per one wheel spacer
Reference: WSPACERGELANDEWAGEN
Brand: Badger
Gelandewagen Wheel Spacers 5 stud 130 PCD With Spigot ring Price is per one spacer
Reference: STUD12X1.5
This extra stud fits the 6 stud wheel spacer used for Hilux, Ford, Mazda, Mitsibushi and others. Stud - M12x1.5mm - high tensile 12.9 grade Nuts - 40CrMo high tensile steel
Reference: STUD12X1-5-REVO
Brand: Badger
The standard studs on the Toyota REVO is too short to fit wheel spacers. If you want to fit wheel spacers to a Revo you will have to replace the original studs on the vehicle with longer studs. This is what these are for. Yes, you must replace all 24x of them.
Reference: WSPACER-NIS-GWM-SPI
Brand: Badger
Fits Nissan Hardbody and GWM Steed PCD = 139.7 Inner Bore = 100.1mm Thickness = 30mm Stud = M12x1.25 Note, if you vehicle has a manual hub in front the spigot ring will not go over it. Price per spacer
Reference: WSPACERMAHINDRA-30mm
Brand: Badger
30mm Wheel spacer to fit Mahindra Thar and Bolero PCD = 5/160 Price is per one spacer
Reference: WSPACER6NISSAN
Brand: Badger
6 Stud Wheel Spacer - Nissan Fits Hardbody and Patrol(Does not fit Y62 Models) PCD 139.7, 30mm thick. Price per unit.
Reference: STUD14X1-5
These extra studs will fit the 5 stud Land Cruiser wheel spacer - M14 x 1.5 Stud - M14x1.5mm - high tensile 12.9 grade Nuts - 40CrMo high tensile steel
Reference: WSPACER5STUD
Brand: Badger
5 Stud Wheel Spacer for Land Cruiser Pick Up PCD 150mm, 45mm thick. Price is per one spacer
Reference: WSPACERJIMNY
Brand: Badger
Wheel Spacer for Jimny, SJ40, Lada Niva, Ford F100. 5 Stud Spacer with 139.7 mm PCD. 30mm thick. Price is per one spacer