Security policy (edit with Customer reassurance module)
Delivery policy (edit with Customer reassurance module)
Return policy (edit with Customer reassurance module)
You can use these wheel spacers to push out the wheel a bit. Some people do it for the looks and others use wheel spacers because they fit new rims and the new rims catches the calipers.
Have a look at http://www.wheel-size.com/size/ to see what size spacer your vehicle use.
NOTE: Price is per spacer!
The wheels spacer bolts onto the vehicle on the existing studs with the nuts supplied. Your wheel then bolts onto the wheel spacer using the studs on the wheel spacer and your original nuts.
NOTE: On the Ford F100 the stud thread pitch differs from that of the spacers. You will use the original Ford nuts to attach the spacer to the vehicle and use the supplied nuts to attach the wheels to the spacer.
Notes: Please read full fitment instructions here:
http://www.4x4direct.co.za/blog/fitment-instructions-for-wheel-spacers/
Make sure the surface on the vehicle hub is clean and free from any debris before fitment.
The same applies to the back of the wheel spacer which should be clean.
Tighten all nuts by hand first, then torque in cross over sequence to 30 Nm. Then Torque to 100Nm.
When you have them fitted at a tyre fitment centre, keep an eye on the procedures because they normally tighten it with impact wrench. DO NOT allow them to use an impact wrench and make sure they tighten them in cross over sequence.
Check the wheel spacer nuts after the first 500 km to make sure they are tight. Thereafter check every 5000km.
The picture below shows how to fit the wheel spacer to your vehicle
Made in PRC to our specifications
By Piet Petoors (Google +)
No customer reviews for the moment.
Reference: WSPACERMAHINDRA-30mm
Brand: Badger
30mm Wheel spacer to fit Mahindra Thar and Bolero PCD = 5/160 Price is per one spacer
Reference: WSPACER6NISSAN
Brand: Badger
6 Stud Wheel Spacer - Nissan Fits Hardbody and Patrol(Does not fit Y62 Models) PCD 139.7, 30mm thick. Price per unit.
Reference: WSPACER5STUD
Brand: Badger
5 Stud Wheel Spacer for Land Cruiser Pick Up PCD 150mm, 45mm thick. Price is per one spacer
Reference: WSPACER6NAVARA
Brand: Badger
6 Stud Wheel Spacer Nissan Navara PCD 114.3. 30mm thick Price per one spacer.
Reference: WSPACERJEEP127
Brand: Badger
Jeep Wrangle JK 2007-2018 5 Stud Wheel spacer with 127mm PCD 30mm thick, with spigot ring Price per one.
Reference: SHANKNUT-14x1.5
Brand: Badger
Wheel nut with Shank for Toyota Land Cruiser with Aluminium rims. M14x1.5 These wheel nuts are used when you fit the standard OEM aluminium rims on a Land Cruiser. Length 47mm -
Reference: STUD12X1.25
This extra stud fits the 6 Stud Nissan spacers Stud - M12x1.25mm - high tensile 12.9 grade Nuts - 40CrMo high tensile steel
Reference: STUD12X1.5
This extra stud fits the 6 stud wheel spacer used for Hilux, Ford, Mazda, Mitsibushi and others. Stud - M12x1.5mm - high tensile 12.9 grade Nuts - 40CrMo high tensile steel
Reference: WSPACER-NIS-GWM-SPI
Brand: Badger
Fits Nissan Hardbody and GWM Steed PCD = 139.7 Inner Bore = 100.1mm Thickness = 30mm Stud = M12x1.25 Note, if you vehicle has a manual hub in front the spigot ring will not go over it. Price per spacer
Reference: WSPACER-FORD-SPI
Brand: Badger
Fits all Ford Ranger and Courier models PCD = 139.7 Inner Bore = 93.1mm Thickness = 30mm Stud = M12x1.5 Note, if you vehicle has a manual hub in front the spigot ring will not go over it. Price per spacer
Reference: WSPACERLANDY
Brand: Badger
5 Stud Wheel Spacer for Land Rover Defender. 38mm thick, 165.1 mm PCD. Price per one spacer.
Reference: WSPACERGELANDEWAGEN
Brand: Badger
Gelandewagen Wheel Spacers 5 stud 130 PCD With Spigot ring Price is per one spacer
Reference: WADAP160-139
Brand: Badger
Change the PCD from 5-160 to 6-139.7 Example- Mahindra to Hilux 6 stud Price is per one wheel adapter Inner Diameter 108mm
Reference: WSPACER-TOY-SPI
Brand: Badger
It will fit front and rear on auto hub models like Revo, Vigo, Prado and FJ Cruiser NOTE: Because of the spigot ring it will NOT fit over a manual hub like on the SFA and IFS Hilux. On SFA and IFS Hiluxes and the older Cruisers it will only fit at the rear and you will still have to fit the normal old universal 6 stud spacer at the front to go over...
Reference: WSPACERJEEP114
Brand: Badger
Wheel Spacer for Jeep 5 stud PCD 114.3 . 30mm thick Price is per one wheel spacer
Reference: WSPACERMAHINDRA-50mm
Brand: Badger
50mm Wheel spacer to fit Mahindra Thar and Bolero PCD = 5/160 Price is per one spacer
