Security policy (edit with Customer reassurance module)
Delivery policy (edit with Customer reassurance module)
Return policy (edit with Customer reassurance module)
You can use these wheel spacers to push out the wheel a bit. Some people do it for the looks and others use it because they fit new rims and the new rims catches the calipers.
The wheels spacer bolts onto the vehicle on the existing studs with the nuts supplied. Your wheel then bolts onto the wheel spacer using the studs on the wheel spacer and your original nuts.
Have a look at http://www.wheel-size.com/size/ to see what size spacer your vehicle use.
NOTE: Price PER WHEEL SPACER
NOTE: If you use it on steel rims the studs are too long for the chrome nuts and you have to trim the studs a little bit. It is however no problem with mags.
Notes: Please read full fitment instructions here:
http://www.4x4direct.co.za/blog/fitment-instructions-for-wheel-spacers/
Make sure the surface on the vehicle hub is clean and free from any debris before fitment.
The same applies to the back of the wheel spacer which should be clean.
Tighten all nuts by hand first, then torque in cross over sequence to 30 Nm. Then Torque to 100Nm.
When you have them fitted at a tyre fitment centre, keep an eye on the procedures because they normally tighten it with impact wrench. DO NOT allow them to use an impact wrench and make sure they tighten them in cross over sequence.
Check the wheel spacer nuts after the first 500 km to make sure they are tight. Thereafter check every 5000km.
The picture below shows how to fit the wheel spacer to your vehicle
Made in PRC to our specifications
By Piet Petoors (Google +)
No customer reviews for the moment.
Reference: OSLRDPFLC
Brand: Badger
Air intake snorkel for Land Rover Defender Puma Lifetime Warranty for cracking and fading.
Reference: SLRDE5A
Brand: Badger
Land Rover Defender TD5 Right Hand Fit Snorkel Most commonly used for all the old model Defenders. fits both petrol and diesel models. Lifetime Warranty for cracking and fading.
Reference: GOBIBASH-DEFENDER
Brand: Gobi-X
Land Rover Defender Aluminium Steering Guard 8mm Automotive Grade Aluminum Alloy Up to 55% Lighter than an equivalent steel design
Reference: WSPACERJEEP127
Brand: Badger
Jeep Wrangle JK 2007-2018 5 Stud Wheel spacer with 127mm PCD 30mm thick, with spigot ring Price per one.
Reference: STUD12X1.25
This extra stud fits the 6 Stud Nissan spacers Stud - M12x1.25mm - high tensile 12.9 grade Nuts - 40CrMo high tensile steel
Reference: WSPACER-ISUZU-SPI
Brand: Badger
Fits all Isuzu bakkies from 1972 to current PCD = 139.7 Inner Bore = 100.1mm Thickness = 30mm - Stud = M12x1.5 Note, if you vehicle has a manual hub in front the spigot ring will not go over it. Price per spacer
Reference: WSPACERJIMNY
Brand: Badger
Wheel Spacer for Jimny, SJ40, Lada Niva, Ford F100. 5 Stud Spacer with 139.7 mm PCD. 30mm thick. Price is per one spacer
Reference: WSPACER6STUD
Brand: Badger
Please note:It does not fit on Hilux Revo Models(2016-onwards) The Revo's standard studs are too short 6 Stud Wheel Spacer for Hilux, Triton, Ford, Isuzu. 6 stud PCD139.7mm and centre bore is 108mm 30mm thick
Reference: WSPACERMAHINDRA-50mm
Brand: Badger
50mm Wheel spacer to fit Mahindra Thar and Bolero PCD = 5/160 Price is per one spacer
Reference: WSPACERJEEP114
Brand: Badger
Wheel Spacer for Jeep 5 stud PCD 114.3 . 30mm thick Price is per one wheel spacer
Reference: STUD12X1-5-REVO
Brand: Badger
The standard studs on the Toyota REVO is too short to fit wheel spacers. If you want to fit wheel spacers to a Revo you will have to replace the original studs on the vehicle with longer studs. This is what these are for. Yes, you must replace all 24x of them.
Reference: WSPACER6NAVARA
Brand: Badger
6 Stud Wheel Spacer Nissan Navara PCD 114.3. 30mm thick Price per one spacer.
Reference: STUD12X1.5
This extra stud fits the 6 stud wheel spacer used for Hilux, Ford, Mazda, Mitsibushi and others. Stud - M12x1.5mm - high tensile 12.9 grade Nuts - 40CrMo high tensile steel
Reference: STUD1-2-20UNF
Brand: Badger
This extra stud will fit the Jeep wheel spacers. Stud - 1/2" x 20UNF - high tensile 12.9 grade Nuts - 40CrMo high tensile steel
Reference: WSPACER-FORD-SPI
Brand: Badger
Fits all Ford Ranger and Courier models PCD = 139.7 Inner Bore = 93.1mm Thickness = 30mm Stud = M12x1.5 Note, if you vehicle has a manual hub in front the spigot ring will not go over it. Price per spacer
Reference: WSPACER-TOY-SPI
Brand: Badger
It will fit front and rear on auto hub models like Revo, Vigo, Prado and FJ Cruiser NOTE: Because of the spigot ring it will NOT fit over a manual hub like on the SFA and IFS Hilux. On SFA and IFS Hiluxes and the older Cruisers it will only fit at the rear and you will still have to fit the normal old universal 6 stud spacer at the front to go over...
Reference: SHANKNUT-14x1.5
Brand: Badger
Wheel nut with Shank for Toyota Land Cruiser with Aluminium rims. M14x1.5 These wheel nuts are used when you fit the standard OEM aluminium rims on a Land Cruiser. Length 47mm -
Reference: WSPACERGELANDEWAGEN
Brand: Badger
Gelandewagen Wheel Spacers 5 stud 130 PCD With Spigot ring Price is per one spacer
Reference: WSPACERMAHINDRA-30mm
Brand: Badger
30mm Wheel spacer to fit Mahindra Thar and Bolero PCD = 5/160 Price is per one spacer
