Where to Next?
Security policy (edit with Customer reassurance module)
Delivery policy (edit with Customer reassurance module)
Return policy (edit with Customer reassurance module)
Ring terminal M6-Red
Insulated ring terminal to fit M6 bolt and 0.5mm² to 1.5mm² wire ( 22-16 awg )
Insulated crimp ring terminal, also known as a ring connector or cable lug. Ring crimp terminals are used for connecting an electrical cable or wire to a stud or a post on an electrical component such as a battery terminal.
Pre-insulated crimp terminals are used to terminate stranded wire. They are applied onto a wire and crimped using our recommended crimp tools to produce a neat terminated end.
No customer reviews for the moment.
Reference: CRIMPINGTOOL-INSULATE
Brand: Iwiss
Iwiss crimping tool for insulated terminals
Reference: TERMINALF1mm
This terminal will fit our Red Male terminals This is the standard sized female spade terminal. 0.5mm² to 1.5mm² wire 6.5mm wide.
Reference: LUG-25H8
Brand: Badger
Takes max of 25mm² cable and fits a M8 bolt Standard tinted lug
Reference: LUG-10H12
Brand: Badger
Takes max of 10mm² Cable and fit M12 bolt. Standard tinted lug
Reference: LUG-16H10
Brand: Badger
Takes max of 16mm² Cable and fit 10mm bolt. Standard tinted lug
Reference: TERMINALM2mm
Brand: Badger
Insulated Male Spade Terminal - Blue each 2.5mm² to 4mm² wire
Reference: TERMPIN-25-15
Brand: Badger
Pin terminal to allow for quick wire connects and disconnects Brazed seam on crimp barrel Tin plated
Reference: TERMBULLETBM
Brand: Badger
Male Bullet Terminal to fit 2.5mm² to 4mm² wire
Reference: LUG-6H10
Brand: Badger
Takes max of 6mm² cable and fit M10 bolt. Standard tinted lug
Reference: LUG-35H6
Brand: Badger
Takes max of 35mm² Cable and fit 6mm bolt. Standard tinted lug
Reference: FERRULE25
Brand: Badger
Tinned Ferrule for 25mm2 Cable Picture for illustration only
Reference: CONNECTORBLOCK2.5mm
Connector Block to connect wires max 2.5sqr mm. In electrician lingo it is also called a "chocolate block"
Reference: LUG-16H6
Brand: Badger
Takes max of 16mm² Cable and fit M6 bolt. Standard tinted lug
Reference: TERMPIN-BLUE
Brand: Badger
Insulated Pin Terminal BLUE
Reference: TERMPIN-16-13
Brand: Badger
Pin terminal to allow for quick wire connects and disconnects Brazed seam on crimp barrel Tin plated
Reference: LUG-6H8
Brand: Badger
Takes max of 6mm² Cable and fit M8 bolt. Standard tinted lug
Reference: FERRULE10
Brand: Badger
Non Insulated crimping Ferrule for 10mm² Cable
