It will fit front and rear on auto hub models like Revo, Vigo, Prado and FJ Cruiser
NOTE: Because of the spigot ring it will NOT fit over a manual hub like on the SFA and IFS Hilux.
On SFA and IFS Hiluxes and the older Cruisers it will only fit at the rear and you will still have to fit the normal old universal 6 stud spacer at the front to go over the manual hub.
PCD = 6/139.7 Inner bore = 106.1mm Thickness = 30mm Stud = M12x1.5
Security policy (edit with Customer reassurance module)
Delivery policy (edit with Customer reassurance module)
Return policy (edit with Customer reassurance module)
Wheel spacer with spigot ring for 6 Stud Hilux and Land Cruiser
It will fit front and rear on auto hub models like Revo and Vigo <br> NOTE: Because of the spigot ring it will NOT fit over a manual hub like on the SFA and IFS Hilux. <br> On SFA and IFS Hiluxes and the older Cruisers it will only fit at the rear and you will still have to fit the normal old universal 6 stud spacer at the front to go over the manual hub. PCD = 6/139.7 Inner bore = 106.1mm Thickness = 30mm
Fits older Land cruisers Model 40, 60, 75 and 80 , also Prado 90 and Prado 120
Please note:It does not fit on Hilux Revo Models(2016-onwards)
The Revo's standard studs are too short
6 Stud Wheel Spacer for Hilux, Triton, Ford, Isuzu. 6 stud
PCD139.7mm and centre bore is 108mm 30mm thick
This extra stud fits the 6 stud wheel spacer used for Hilux, Ford, Mazda, Mitsibushi and others.
Stud - M12x1.5mm - high tensile 12.9 grade
Nuts - 40CrMo high tensile steel
Please note:It does not fit on Hilux Revo Models(2016-onwards)
The Revo's standard studs are too short
6 Stud Wheel Spacer for Hilux, Triton, Ford, Isuzu. 6 stud
PCD139.7mm and centre bore is 108mm 30mm thick
Fits Nissan Hardbody and GWM Steed
PCD = 139.7 Inner Bore = 100.1mm Thickness = 30mm Stud = M12x1.25
Note, if you vehicle has a manual hub in front the spigot ring will not go over it.
The standard studs on the Toyota REVO is too short to fit wheel spacers. If you want to fit wheel spacers to a Revo you will have to replace the original studs on the vehicle with longer studs. This is what these are for. Yes, you must replace all 24x of them.
These extra studs will fit the 5 stud Land Cruiser wheel spacer - M14 x 1.5
Stud - M14x1.5mm - high tensile 12.9 grade
Nuts - 40CrMo high tensile steel
Fits all Ford Ranger and Courier models
PCD = 139.7 Inner Bore = 93.1mm Thickness = 30mm Stud = M12x1.5
Note, if you vehicle has a manual hub in front the spigot ring will not go over it.
Fits all Isuzu B-series and D-max
PCD = 139.7 Inner Bore = 100.1mm Thickness = 30mm - Stud = M12x1.5
Note, if you vehicle has a manual hub in front the spigot ring will not go over it.